Tranciatrice idraulica McIntyre 200B

Available with or without a stand, this machine might look small but it has a big cutting capacity.

Small but powerful

McIntyre’s wide experience in hydraulic equipment manufacture has enabled us to build an 8” shear with a staggering cutting force. Although equipped with only an 8” blade, the high shear force and wide tip to tip opening on the McIntyre 200B means that it can deal efficiently with a whole range of non- ferrous cleaning and sizing operations – in particular larger diameter electric cables and valves. In most cases – if your metal will fit into the jaw of the 200B, then this machine will cut it.

Technical Data

• • Machine dimensions: 1130 x 680 x 1360mm
  • Blade Length: 200mm / 8”
  • Tip to tip opening: 150mm / 6”
  • Shearing height: 932mm / 36.7”
  • Weight with oil: 420kg
  • Oil capacity: 60 Litres / 13.5 Gallon
  • Noise Level: 75 +/- 3dBA
  • Cut control: Single Cut repeating
  • Standard Electrical Requirements: 32A / 3ph / 380-145v / 50Hz
  • Power Rating: 4 kW / 5.4hp
  • Motor speed: 1430 rpm
  • Max system Pressure: 220 Bar / 3200 psi
  • Max Shear force: 65 Tonnes
  • Fully open cut speed: 8 dry cycle per min
  • 40% Stroke cut speed: 21 dry cycle per min
  • Cutting Capacity: 42mm (1.65”) Round Bar / 38mm (1.5”) Square Bar

***While we make every effort to ensure that our information is correct, technical data is for guidance only and subject to change. If any dimension or performance indication is important to you, please check with us before ordering.***